Track System To Fit Most Modern 4X4 Vehicles
Track Vehicle Tech Is Your Local Dealer/Distributor For ATT Rubber Track Systems For 4X4 Vehicles
Track Kit Information:
We can supply rubber conversion kits for off-road transportation in snow, mud, swamps and other terrain. Our latest track system, the Dominator Series, is designed for use in snow, slush, ice, mud, marsh, swamp, wet terrain, and even on dry ground at lower speeds. Dominators are the lightest on the market at about 170 lbs each, allowing for easy, one-person installation. Dominators provide excellent floatation, reducing the vehicle’s ground pressure to less than 2 pounds per square inch, making it nearly impossible to get stuck, even in the deepest snow or mud. Plus, Dominators will add ground clearance to your vehicle by an average of 6" depending on the height of your original tires. For instance, Dominators raise most Chevy Blazers by 9" making the vehicle’s height, at center of hubs, 21.5" from the ground.
Dominators use the highest quality 121" x 15" snowmobile tracks, bogie wheels, and slides. These snowmobile industry parts hold up very well on the Dominator track systems. For instance, we have seen rubber tracks which have logged thousands of miles and only exhibited minimal signs of wear—they basically looked like new.
All of our metal components (frames, rails and drive sprockets) are made from high quality American steel, produced here in Northern Michigan. And all of the wear items (tracks, bogie wheels, slides and bearings), are available from your local snowmobile dealers and auto parts stores, so there is no need to order specialized replacement parts from us. The parts that are specialized, such as the frames, rails and drive sprockets, are designed to last a lifetime and are unlikely to ever need replacing. All of our steel components are protected by a powder coated finish to provide years of corrosion free service. And Dominators are backed by our exclusive DUAL WARRANTY**
Installation is a breeze! Dominators can be installed by one person in under 2 hours the first time, and removed or re-installed in about 30 minutes thereafter. Dominators are light enough to be transported in the back of a truck and are easily installed, even outdoors on the roadside!
Track Kit Compatibility:
Dominator track systems are intended for mid-size 4x4 passenger vehicles (pick-ups and s.u.v.’s). These vehicles are generally characterized by a 5 bolt hub. Dominators have been installed on many GMC/Chevy Blazers, Jimmys, and S-10 pickups, Ford Explorers and Rangers, and Jeep Cherokees, Grand Cherokees, and Wranglers. We have also installed Dominators on Geo Trackers, Suzuki Samuris and Sidekicks, and even on some 6 bolt Toyota and GMC/Chevy pickups.
We have several popular bolt patterns, such as the 5 x 4.75” and the 5 x 4.5”. We are also adding more bolt patterns as our customer’s request.
Dominators are compatible with nearly all vehicles having a 5 bolt hub, and many vehicles having a 6 bolt hub. Some installations require bolt pattern adaptors, which we will provide with the track system.
If you are considering tracks for your vehicle, we will be glad to help. Simply give us a call or send us an email with the year, make and model of your vehicle. You should also include your general location and the intended purpose for the tracks. We try hard to respond the same day, but sometimes it takes a bit longer.
Warranty:
100% Satisfaction Guarantee: If you are not delighted with any of our products for any reason, simply return to us within 30 days of delivery for a money back refund (less freight and 15% restocking fee). All Dominator Track Systems and Hydraulic Systems also include a 1 year warranty against manufacturing defects. Simply return the products to us and we will correct the problem to your satisfaction, or exchange the product for a new one. Warranty does not apply to wear items such as rubber tracks, bogie wheels, slide rails, hoses, etc.
Track Specifications
DOMINATOR tracks use 121” long rubber tracks. The ground contact dimensions are 48” long by 15” wide. This provides 720 square inches of surface area per track unit, or 2,880 square inches of surface area for a complete system.
DOMINATOR XL tracks use 136” long rubber tracks. The ground contact dimensions are 57” long by 15” wide. This provides 855 square inches of surface area per track unit, or 3,420 square inches of surface area for a complete system.
Most vehicles are capable of using either the DOMINATOR or DOMINATOR XL tracks. It is also possible to install DOMINATOR tracks on the front axle and DOMINATOR XL tracks on the rear axle. If you are unsure which tracks are best for your vehicle and your needs, feel free to call us. We are glad to help.
DOMINATOR DOMINATOR XL
Weight (average) 176 lbs 193 lbs
Height at center of hub 21" 21"
Length on the ground 48" 57"
Width on the ground 15" 15"
Floatation surface area per track unit 720 sq. inches 855 sq. inches
Floatation surface area per system 2,880 sq. inches 3,420 sq. inches
We can supply rubber conversion kits for off-road transportation in snow, mud, swamps and other terrain. Our latest track system, the Dominator Series, is designed for use in snow, slush, ice, mud, marsh, swamp, wet terrain, and even on dry ground at lower speeds. Dominators are the lightest on the market at about 170 lbs each, allowing for easy, one-person installation. Dominators provide excellent floatation, reducing the vehicle’s ground pressure to less than 2 pounds per square inch, making it nearly impossible to get stuck, even in the deepest snow or mud. Plus, Dominators will add ground clearance to your vehicle by an average of 6" depending on the height of your original tires. For instance, Dominators raise most Chevy Blazers by 9" making the vehicle’s height, at center of hubs, 21.5" from the ground.
Dominators use the highest quality 121" x 15" snowmobile tracks, bogie wheels, and slides. These snowmobile industry parts hold up very well on the Dominator track systems. For instance, we have seen rubber tracks which have logged thousands of miles and only exhibited minimal signs of wear—they basically looked like new.
All of our metal components (frames, rails and drive sprockets) are made from high quality American steel, produced here in Northern Michigan. And all of the wear items (tracks, bogie wheels, slides and bearings), are available from your local snowmobile dealers and auto parts stores, so there is no need to order specialized replacement parts from us. The parts that are specialized, such as the frames, rails and drive sprockets, are designed to last a lifetime and are unlikely to ever need replacing. All of our steel components are protected by a powder coated finish to provide years of corrosion free service. And Dominators are backed by our exclusive DUAL WARRANTY**
Installation is a breeze! Dominators can be installed by one person in under 2 hours the first time, and removed or re-installed in about 30 minutes thereafter. Dominators are light enough to be transported in the back of a truck and are easily installed, even outdoors on the roadside!
Track Kit Compatibility:
Dominator track systems are intended for mid-size 4x4 passenger vehicles (pick-ups and s.u.v.’s). These vehicles are generally characterized by a 5 bolt hub. Dominators have been installed on many GMC/Chevy Blazers, Jimmys, and S-10 pickups, Ford Explorers and Rangers, and Jeep Cherokees, Grand Cherokees, and Wranglers. We have also installed Dominators on Geo Trackers, Suzuki Samuris and Sidekicks, and even on some 6 bolt Toyota and GMC/Chevy pickups.
We have several popular bolt patterns, such as the 5 x 4.75” and the 5 x 4.5”. We are also adding more bolt patterns as our customer’s request.
Dominators are compatible with nearly all vehicles having a 5 bolt hub, and many vehicles having a 6 bolt hub. Some installations require bolt pattern adaptors, which we will provide with the track system.
If you are considering tracks for your vehicle, we will be glad to help. Simply give us a call or send us an email with the year, make and model of your vehicle. You should also include your general location and the intended purpose for the tracks. We try hard to respond the same day, but sometimes it takes a bit longer.
Warranty:
100% Satisfaction Guarantee: If you are not delighted with any of our products for any reason, simply return to us within 30 days of delivery for a money back refund (less freight and 15% restocking fee). All Dominator Track Systems and Hydraulic Systems also include a 1 year warranty against manufacturing defects. Simply return the products to us and we will correct the problem to your satisfaction, or exchange the product for a new one. Warranty does not apply to wear items such as rubber tracks, bogie wheels, slide rails, hoses, etc.
Track Specifications
DOMINATOR tracks use 121” long rubber tracks. The ground contact dimensions are 48” long by 15” wide. This provides 720 square inches of surface area per track unit, or 2,880 square inches of surface area for a complete system.
DOMINATOR XL tracks use 136” long rubber tracks. The ground contact dimensions are 57” long by 15” wide. This provides 855 square inches of surface area per track unit, or 3,420 square inches of surface area for a complete system.
Most vehicles are capable of using either the DOMINATOR or DOMINATOR XL tracks. It is also possible to install DOMINATOR tracks on the front axle and DOMINATOR XL tracks on the rear axle. If you are unsure which tracks are best for your vehicle and your needs, feel free to call us. We are glad to help.
DOMINATOR DOMINATOR XL
Weight (average) 176 lbs 193 lbs
Height at center of hub 21" 21"
Length on the ground 48" 57"
Width on the ground 15" 15"
Floatation surface area per track unit 720 sq. inches 855 sq. inches
Floatation surface area per system 2,880 sq. inches 3,420 sq. inches
Vehicle Compatabilty
Dominator track systems are intended for 4x4 vehicles ½ ton series or smaller. These vehicles are generally characterized by 5 or 6 bolt hubs. In some cases Dominators may be used on heavier ¾ ton and 1 ton vehicles, depending on the circumstances. These are vehicles typically characterized by the 8 bolt hubs.
Dominators have been installed on:
GMC/Chevy Blazer, Jimmy, S-10, Silverado, Sierra, Suburban, Tahoe, and Yukon. Ford Explorer, Ranger, F-150, and Expedition. Jeep Cherokee, Grand Cherokee, Wrangler, Rubicon, and Liberty. Dodge Durango, Dakota, and Ram. Toyota 4Runner, Rav4, Tacoma, Tundra, Land Cruiser, and FJ Cruiser. Geo Tracker, Suzuki Samuri and Sidekick. And we are installing Dominators onto new vehicles all the time. If your vehicle is not listed here, please contact us for options and info.
Dominators are compatible with nearly all vehicles with 5 bolt or 6 bolt hubs. Our tracks can be installed on some vehicles with 7 and 8 bolt hubs by using adaptors. When bolt pattern adaptors or spacers are required, we will provide them with the system, to ensure the customer gets everything they need for a trouble-free installation.
If you are considering tracks for your vehicle, we will be glad to help. Simply give us a call or send us an email with the year, make and model of your vehicle. You should also include your general location and the intended use/purpose for the tracks. We try to respond the same day, but sometimes it takes a bit longer.
Dominator track systems are intended for 4x4 vehicles ½ ton series or smaller. These vehicles are generally characterized by 5 or 6 bolt hubs. In some cases Dominators may be used on heavier ¾ ton and 1 ton vehicles, depending on the circumstances. These are vehicles typically characterized by the 8 bolt hubs.
Dominators have been installed on:
GMC/Chevy Blazer, Jimmy, S-10, Silverado, Sierra, Suburban, Tahoe, and Yukon. Ford Explorer, Ranger, F-150, and Expedition. Jeep Cherokee, Grand Cherokee, Wrangler, Rubicon, and Liberty. Dodge Durango, Dakota, and Ram. Toyota 4Runner, Rav4, Tacoma, Tundra, Land Cruiser, and FJ Cruiser. Geo Tracker, Suzuki Samuri and Sidekick. And we are installing Dominators onto new vehicles all the time. If your vehicle is not listed here, please contact us for options and info.
Dominators are compatible with nearly all vehicles with 5 bolt or 6 bolt hubs. Our tracks can be installed on some vehicles with 7 and 8 bolt hubs by using adaptors. When bolt pattern adaptors or spacers are required, we will provide them with the system, to ensure the customer gets everything they need for a trouble-free installation.
If you are considering tracks for your vehicle, we will be glad to help. Simply give us a call or send us an email with the year, make and model of your vehicle. You should also include your general location and the intended use/purpose for the tracks. We try to respond the same day, but sometimes it takes a bit longer.
